It's necessary to take good care of the medical case. The quality of the case depends on our careful care in every step.

步從選材要選擇的冷軋鋼板。機箱機柜經過剪裁，焊接，打磨，組裝等相關程序步步把關才能使質量具有水準。

The first step is to select high-quality cold-rolled steel plate from the material selection. After cutting, welding, polishing, assembling and other related procedures, the quality of the cabinet can reach the international standard.

第二步，我們?cè)谶x擇的機箱機柜時候，考慮的應是性，一絲一毫不能松懈。將執行關鍵任務的IT設備裝進能上鎖的機柜里會讓網絡管理員倍感輕松，這樣也限制了能夠打開機柜的人數。

Second, when we select the cabinet, we should first consider the safety, and we should not relax at all. Putting mission critical it equipment in a lockable cabinet makes it easier for network administrators, which also limits the number of people who can open the cabinet.

第三步，在選購醫療機箱機柜時，所有裝在機柜內的設備和它們完整的測量數據：高、長、寬、重量。設備的總高度將更終決定可以把多少設備裝進機柜。顯然，高的機柜能裝進更多的設備，而且更省地方。當然盡量利用機柜的高度不是的考慮，機柜的后部也有很大的地方可以利用。這就是要測量機柜深度的原因。選擇較深的機柜，可以把兩套設備背靠背地裝進去，從而安裝更多的設備。采用上述方式可在機柜中裝入兩排設備，一排從機柜的前門裝卸，另一排從后門裝卸。機柜應有可調節的垂直導軌架，可以裝入不同深度的設備，同時使機柜根據設備的深度而保持更小深度。

Step 3: when purchasing the medical case cabinet, all the equipment installed in the cabinet and their complete measurement data: height, length, width and weight. The total height of the equipment will ultimately determine how much equipment can be put into the cabinet. Obviously, a high cabinet can accommodate more equipment and save more space. Of course, it is not the only consideration to make the most of the height of the cabinet. There is also a large space in the back of the cabinet. This is why the cabinet depth is to be measured. Choose a deeper cabinet, you can install two sets of equipment back-to-back, so as to install more equipment. In the above way, two rows of equipment can be installed in the cabinet, one is loaded and unloaded from the front door of the cabinet, and the other is loaded and unloaded from the back door. The cabinet shall have adjustable vertical guide rail frame, which can be installed into equipment of different depths, and keep the cabinet at the minimum depth according to the depth of equipment.